Refrigerator too warm?

Recently, I have had more than one customer asking why their refrigerator would be getting warm while their freezer section remained frozen.

Most refrigerators use one mechanical device to cool the freezer down to around 0 degrees, regulated by the freezer setting. Some of that cold air flows into the refrigerator compartment, regulated by the refrigerator setting. The refrigerator compartment is typically set to around 38 degrees.

When the unit is not cooling properly, you will first notice it in the refrigerator section. A 20 degree rise in temperature will result in a refrigerator compartment temperature of 58 degrees. At that temp, milk will sour and meats will rot.

You may notice that your freezer section is still frozen. A 20 degree rise will result in compartment temps of 20 degrees. Frozen food will remain frozen at 20 degrees, so it appears that the freezer is still working. Take my word for it--neither is working if the fridge is not.

What is the cause of this? For the most part, lack of maintenence on the part of the owner. Customers usually have a blanket of pet hair covering the heat exchanger coils beneather the fridge. When I instructed my customers on how to clean the condenser coils, they inevitably return in a few days to thank me for saving them a service call ($65 minimum) or, worse yet, having to buy a new fridge ($$$).

Proper maintenence is one of the benefits of a Master Protection Agreement. With some product problems, a technician may be able to help you resolve the issue right over the phone, which could save time by not having to schedule an appointment. A protection agreement can provide you with peace of mind by knowing that if a problem occurs with your product, you know whom to call to take care of it right away.

Master Protection Agreements

The "gold standard" for coverage. Primary benefits include*:

• Quality service provided by Sears Parts & Repair Services professional repair specialists
• Convenient service available in-home or at a Sears Parts & Repair Service Centers (service location depends on agreement coverage)
• Non-technical and instructional assistance available
• Replacement guarantee
• if you experience 4 or more functional repairs during 12 months of continuous coverage or
• if we are unable to fix it due to unavailability of functional parts or technical knowledge
• No extra charges for covered repairs. All parts and labor included, even for wear and tear repairs and, for the first 3 years, cosmetic parts (if part still functions, but has become cosmetically worn, such as control panel buttons)
• 10% discount off regularly priced non-covered parts or service
• Food Loss up to $250 every 12 months.
• Rental Reimbursement if repair takes too long
• Annual Preventive Maintenance Check included, at the customer's request
• Renewable, transferable and varying contract terms offer maximum flexibility

* Some limitations and exclusions apply. Not valid on products used for commercial purposes. See store or contact us at 1-800-4-MY-HOME® (1-800-469-4663) for Terms & Conditions details. Protection agreements not available in all states for items not purchased at Sears.

Clothes Dryer Fire Prevention

Few people realize the importance of clothes dryer fire prevention. According to the U.S. Consumer Product Safety Commission, there is a need to perform yearly maintaintence on clothes dryers to prevent fires. Some faulty appliances are to blame, but most fires can be prevented with proper dryer venting.

How a Clothes Dryer Fire Occurs

Lint accumulation and reduced airflow feed on each other to provide conditions ripe for a fire. Lint is a highly combustible material. In fact, it is one of the ingredients in a recipe for home-made fire starters. A number of dryer vent problems contribute to this.

A growing problem

Traditionally, most clothes dryers were in the basement. However, many new homes are built with dryers located away from an outside wall, such as in bedrooms, bathrooms, kitchens and hall closets. These new locations mean dryers tend to be vented longer distances and vents are generally installed with sharp turns and bends to accommodate the structure of the home. As a result, dryer vents are harder to reach and the turns and bends create more places for lint to gather.

Ideally, you should have short, straight, dryer duct venting. However, a dryer vent booster, while not the ideal approach, can improve your dryer venting in cases where your venting is longer and/or has more bends than it should. In addition to creating a fire hazard, if the venting is too long and/or has two many bends, it will cause your dryer to take much longer than necessary to dry loads.

Inside the Dryer

Lint is the biggest culprit here. As you know from cleaning out your lint filter, dryers produce very large quantities of lint. Most people assume their lint traps catch all the lint, and that all they need to clean out after each load. However, a significant amount of this lint is not caught by the lint trap and builds up inside the dryer, including on the heating element! Lint can build up on the heating element and in other places inside the dryer, causing it to overheat and possibly catch fire. If you are skeptical, pull out the lint trap and look underneath it. You may find large quantities of lint staring up at you. Improper clothes dryer venting practices outside the dryer can play a key role in this process.

Outside the Dryer

There are many improper dryer vent practices which restrict airflow and lead to lint buildup, the two main preventable causes of clothes dryer fires. Some of the most common and important dryer vent mistakes are:

1. Dryer vents are too long and/or have too many bends, but don't use a dryer duct booster, resulting in lint buildup. When it comes to dryer vents, shorter and straighter is better.

2. Use of flammable, flimsy plastic or foil duct extenders.
Only metal vents should be used, which is what most manufacturers specify. Metal vents also resist crushing better than plastic and foil, which allows the air and lint to be carried out of the system. Reduced airflow from build-up or crushing can cause overheating and wear out the clothes and appliance faster. In fact, many state and local municipalities have placed requirements on new and remodeling projects to include all metal dryer venting. Using plastic may even void the manufacturers warranty. When it comes to dryer vents, smoother metal is better, but corrugated metal is OK.

3. Inadequate clearance space between dryer and wall.
Many people create problems by putting their dryer right against the wall, crushing the venting material in the process, and blocking the cooling vent slits. The cumulative effect of reduced airflow and the resulting lint build-up prevent the dryer from drying at the normal rate. This causes the high temperature limit safety switch to cycle on and off to control the heater. Most high temperature limit safety switches were not designed to continuously cycle on and off, so they fail over a period of time.

4. Failure to clean the dryer duct on a regular basis.
If the clothes are taking an inordinately long period of time to dry, come out hotter than usual or if the vent hood flapper doesn't open, maintenance is needed. Your dryer may be fine. It may be that the duct is clogged. Do not ignore these symptoms!

Only You Can Prevent Clothes Dryer Fires

Proper Installation & Choice of Building Materials

1. Make sure the dryer duct is made of solid metal. Both vinyl and foil are combustible and spiral-wound surfaces tend to catch lint more readily.

2. The dryer duct should vent to the exterior and should never vent to the attic or crawlspace. Avoid the use of inside heat recovery diverter valves or termination boxes. Dryer exhaust is hot and humid. Venting it to the interior is just asking for mold and mildew growth.

3. Avoid kinking or crushing the dryer duct to make up for installation in tight quarters -this further restricts airflow. If you really want to save the extra space, the Dryerbox is a new invention that allows the dryer to be safely installed against the wall.

4. Minimize the length of the exhaust duct (maximum recommended lengths depend on a number of factors, such as number of bends, and vary by model-check with your manufacturer for their specifications). If this is not possible, you can install a dryer duct booster.

5. If at all possible, use 4-inch diameter vent pipe and exterior exhaust hoods that have openings of sixteen square inches or more, which offer the least resistance to air flow.

6. Don't use screws to put your vent pipe together - the screw shafts inside the piping collect lint and cause additional friction.

Keep the Dryer Duct in Good Condition

Disconnect, clean and inspect the dryer duct run on a regular basis, or hire a professional company to clean the dryer duct. This will reduce the fire hazard, increase the dryer's efficiency and increase its lifespan. In addition, you are less likely to experience water damage.

Keep Your Dryer as Lint-Free as Possible

By keeping your dryer clean, not only will you significantly reduce the fire hazard, you will also save money as your dryer will run more efficiently and last longer.

To keep your dryer clean:

1. Use a lint brush or vacuum attachment to remove accumulated lint from under the lint trap and other accessible places on a periodic basis.

2. Every 1-3 years, depending upon usage, have the dryer taken apart and thoroughly cleaned out by a qualified service technician. Master Protection Agreements include this service annually, at your request.

3. Clean the lint trap either before or after each load.

Alternative Solutions

1. Use a dryer with a larger blower motor, such as the Kenmore Elite Oasis 67032, 68062, or 68082. Theey have a 35% larger blower, which moves more air and can compensate for longer runs, up to 200 feet if ducting is in a straight line (subtract 15 feet for every 90 degree bend).

2. Use a High Efficiency washer, which uses an extremely fast spin speed (>1000 RPM) to extract water from the clothes. They extract significantly more water from the clothes than a conventional washing machine spin cycle does. Examples are Kenmore Oasis, Whirlpool Cabrio, and Maytag Bravos top loaders. All front loaders spin 1000 RPM or more. The Kenmore Elite HE5t 47081 spins the fastest at 1300 RPM.

3. Use a solar powered clothes dryer. These new developments in clothes drying technology consist of a high tensile strength filament combined with pressurized attachment devices to intercept the sun's incoming solar radiation, causing an evaporative effect on the clothing's fabric. Also know as a clothesline and clothespins, these units have never been know to cause a fire, but they do tend to collect any dust or pollen that may be present within the vicinity of their operation.

Before You Go....

1. Never let your clothes dryer run while you are out of the house or when you are asleep.

2. Thoroughly read manufacturers' instructions regarding the safe use of their dryers.

Overheated Clothes Dryers Can Cause Fires

What to know about H2O

The dangers of dryer fires

Visit msnbc.com for Breaking News, World News, and News about the Economy

Dryer Fires in the news

Click here to see a Google News search of dryer fires nationwide within the past week.

Clothes Dryer Mishap in Montour

Frosty Valley Rd Dryer Fire

This story is from the Saturday, April 11, 2009 Edition of the Press Enterprise

Fire fears confirmed

By MICHAEL LESTER
Press Enterprise Writer

HEMLOCK TWP. — When Melanie Engelhardt saw thick gray smoke billowing into the sky while leaving Wal-Mart yesterday, she couldn't help but notice the smoke was rising right around the area of where her house would be.

Melanie pointed out the smoke to her mom, Sharon Engelhardt, and they decided to delay lunch plans at Perkins to make the 2-mile drive to check on the home.

Along the way, Sharon asked her daughter if she had blown out a candle in the bathroom. Sharon also remembered she had left a clothes dryer running.

When the women arrived at 149 Frosty Valley Road shortly after 2 p.m., they found several fire trucks lining the road and over 50 volunteer firefighters from at least six departments spraying water into the windows of their farmhouse.

With neighbors at their sides comforting them, Sharon and Melanie stood watching tearfully in their yard for hours as flames destroyed the four-bedroom home on 20 acres Sharon and husband Robert bought three years ago for $300,000...

...Sharon and Melanie speculated the dryer or the bathroom candle may have started the fire. Neither could remember for sure if the candle was lit when they left. But Sharon was certain the clothes dryer was running. She had been washing clothes to donate to Goodwill. "I'm so heartbroken," Sharon said. "I don't know what we're gonna do."
...
As she watched firefighters spray water at flames rising inside her second-story bedroom window, Melanie thought about the $1,500 in baby-sitting and gift money she had saved up. She kept it in the attic. Surely it was gone, Melanie figured. She also thought about her new laptop and clothes.

Sharon thought of Melanie's baby photos and the pictures taken every year at the Bloomsburg Fair of Melanie posing with animals. Sharon said she'll also miss her picture of Mother Teresa. "This is stuff you can't replace," Sharon lamented.

Contact Reporter Michael Lester at 387-1234, ext. 1311 or at mike.l@pressenterprise.net.